Map Lights; Egress Lighting; Am/Fm Radio/Cd Player; Uhf Two Way Radio - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Two Egress lights on the front corners of the cabin provide
exit safety in dark conditions.

Map Lights

There are 2 map lights in the front right ceiling
which can be operated together or individually
(shown bottom right).
The front map light is fixed. The Outer rocker
switch is used to switch the light On & Off.
The rear directional map light can be adjusted
as desired. The Outer rocker switch is used to
switch the directional light On & Off.

Egress Lighting

The Cruiser is fitted with Egress lighting
(shown above) to assist in exiting the machine
safely when parking in dark conditions.
The G-Hub Controller keeps these outside
work lights on for 30 seconds after the engine
is stopped & the ignition key removed.
Map Lights only operate when the ignition key is On (in the
"Accessories" or "Run" position.
GA8701177 REV 2 APRIL 2022
The AM/FM Radio/CD Player located in the Overhead
Console above & in front of the operator in the cabin.

AM/FM Radio/CD Player

The entertainment radio, located in the
Overhead Panel in front of the operator
comprises an AM/FM radio tuner and single
CD player. A Bluetooth compatible phone
system is also installed in the unit.
Operating instructions for AM/FM Radio/CD
Player are provided in the Entertainment AM/
FM Radio/CD Player manual supplied with this
manual.
Use the Outer rocker switch to switch the front map light
On & Off.
Cabin – Your Sprayer at a Glance
The UHF Two Way Radio located in the Overhead Console
above & in front of the operator in the cabin.

UHF Two Way Radio

The UHF Two Way Radio, located in the
Overhead Console of the cabin, has the hand
piece is located in the right hand rear corner
of the cabin.
The operating instructions for the UHF Two
Way Radio are provided in the UHF Two Way
Radio manual supplied with this manual.
Use the Inner rocker switch to switch the directional map
light On & Off.
The Air Conditioner Panel (see next page for details).

Air Conditioning Controls

The touch buttons of the automatic air
conditioning panel (located above the light
switches on the Overhead Console), are used
to choose & regulate airflow, temperature &
humidity within the cabin.
Operating modes of the air conditioner include:
1 Automatic Mode - fully automatic
operation (ideal for high outside
temperatures).
2 Manual Ventilation Mode - Automatic
Mode with manual fan speed contol.
3 ECON Mode - Automatic Mode without
the cooling function.
4 Demisting Windows Mode - Continuous
operation at maximum fan speed.
To activate the air conditioner
Switch the Ignition On & start the engine.
Once ignition is On, a software version is
displayed for 3 seconds, then a self-testing
procedure takes a maximum of 20 seconds,
to complete, then the control touch buttons
on the Air Conditioner Contol Panel are
enabled for use.
On activation, the air conditioning mode
displayed will be the same as last used.
3
39