Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 66

Preparation for Use – Setting Up
4
Select & press 'Self-propelled Sprayer'
8 Select & press 'Self-propelled Sprayer'
and the screen returns to the Name Profile
screen with selection 'Self-propelled
Sprayer' displayed.
A single nozzle plumbing to the centre of the boom- refered
to as centreline or row crop plumbing.
66
Press the 'Application Width' touch button.
9 Press the 'Application Width' touch button
and a numerical keypad appears.
It is important that the 'Application Width'
of the machine is entered correctly.
Determine how the boom is plumbed.
Booms may be plumbed with either:
• Centreline (rowcrop) plumbing -
A single nozzle at the boom centre or
• Broadacre plumbing - Two nozzles
either side of the boom centre.
Two nozzles plumbed either side of the centre of the boom -
refered to as broadacre plumbing.
Each has a different spray application
width, for example, on a 36m boom:
• Centreline plumbing has 73 nozzles x
500mm = 36.5m application width.
• Broadacre plumbing has 72 nozzles x
500mm = 36m application width.
To calculate Applicaton Width, count the
number of nozzles on the boom line, then
multiply by the nozzle spacing.
Press the touch buttons to enter the boom
width. eg. '36.5' metres, then press the
'Next' touch button.
The screen returns to the Name Profile
screen with '36.500' displayed.
Press 'Units' touch button.
10 Press the 'Units' touch button and a units
menu appears.
Select & press 'm' (metres) and the screen
returns to the Name Profile screen with
selection 'm' displayed.
11 Press the 'Next' touch button and a
'Setup System' screen appears.
12 Press the 'ECU #' touch button and a
drop down menu appears.
Select & press the appropriate 'ECU #'
and the number 1 appears in the Setup
System screen.
Press the 'ECU #' touch button, then, press'Number of
Products' touch button.
GA8701177 REV 2 APRIL 2022