Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 87

Press the RPM tab to open the tab screen, then press the RPM Raise 'On/Off'
touch button to select On or Off.
C. RPM Tab
Press the RPM Tab touch button to open the RPM tab screen
and the RPM tab screen opens displaying the RPM Control
functions:
i) RPM Raise
ii) Fill Pump RPM
iii) Spray Pump RPM
i) RPM Raise
The RPM Raise setting sets an engine speed to be activated
on the G-Hub screen when a higher than idle speed is required
while stationary, for example, when warming up the engine,
warming up oil systems and other requirements.
To Select the RPM Raise:
Press the RPM Raise 'On/Off' touch button to select On or
OFF.
The touch button displays Green when selected & Grey
when deselected.
GA8701177 REV 2 APRIL 2022
Press the 'Engine RPM' display touch button to set the raised engine speed.
To Set the Engine RPM Raise:
1 Press the 'Engine RPM' display touch button and a
numerical keypad appears.
2 Press the numbers to set the required value (eg, 1500),
then press Enter. The screen returns to the RPM tab
screen with eg, '1500' displayed in the 'Engine RPM
display.
Setting Up – Preparation for Use
Press the Fill Pump Raise 'Auto' touch button to select or deselect the function,
then press the 'Engine RPM' display touch button to set the speed.
ii) Fill Pump RPM
The Fill Pump RPM setting sets an engine speed which is
automatically activated while the Cruiser is stationary and the
Fill Pump is activated for filling functions.
To Select the Fill Pump RPM:
Press the Fill Pump RPM 'Auto' touch button to select or
deselect it.
The touch button displays Green when selected & Grey
when deselected.
To Set the Fill Pump RPM:
1 Press the Fill Pump RPM 'Engine RPM' display touch
button and a numerical keypad appears.
2 Press the numbers to set the required value, (eg, 1200),
then press Enter. The screen returns to the RPM
tab screen with '1200' displayed in the 'Engine RPM'
display.
4
87