Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 219

Press the 'G-Motion' tab touch button to display the screen - this screen is used
to check Joystick push button & rocker switch functions & operate the Joystick
functions in Virtual Mode.
ii) G-Motion
Press the G-Motion tab touch button to display the G-Motion
screen
The G-Motion display screen provides two testing functions:
• To check the function of each push button and rocker
switch on the Joystick.
• To operate each function in Virtual Mode.
In Virtual mode, the Joystick is disabled & the screen
touch buttons can be used to operate the various
joystick push button & rocker switch functions.
This is useful if the Joystick fails. For example, the
boom can be folded and the Cruiser moved temporarily
without the Joystick.
GA8701177 REV 2 APRIL 2022
Trouble Shooting – Fast Tracking Problems
Press a Joystick push button (eg, L Fence Nozzle), then its corresponding switch
on the G-Motion screen will light up Green, if functioning correctly.
To Check the Function of Each Switch:
1 While in the G-Motion Diagnostic screen, press the relevant
touch button or switch on the Joystick:
• If a push button or switch is working, its corresponding
touch button on the G-Motion Diagnostic screen will
light up Green each time the push button or switch is
pressed.
• If a push button or switch is not working, its
corresponding touch button on the G-Motion Diagnostic
screen will not light up.
2 If a touch button on the G-Motion Diagnostic screen does
not light up, then locate the Joystick Control Module
(shown above right) and check that connectors are fitting
correctly.
(A)
(B)
The Joystick Module (A) & Console Switch Module (B) located under the cabin
control console below the Joystick.
3 The Joystick Module is located under the control console in
the cabin. Remove the top cover of the console and check
the connectors.
The Cabin Switch Module is also located under the control
console (shown above).
4 After checking the Joystick Module connectors, re-check
the function of the relevant push button or switch using the
Joystick and the G-Motion Diagnostic screen.
5 If the function continues to not light up it will be neccessary
check the relevant function in Virtual Mode.
9
219