Chapter 3 Starting And Stopping; Installing The Application - NEC Flash Memory Programmer PG-FP3 User Manual

This chapter explains how to install, start, and terminate the application. It also contains information on initialization
and on use of the application. Be sure to read this chapter, since it provides very important information about using
the PG-FP3. Unless the information in this chapter is not understood and followed, the PG-FP3 may not operate
correctly.

3.1 INSTALLING THE APPLICATION

This section explains how to install the application program.
Caution Because the program file is stored in compressed form on the floppy disk, it cannot be used
simply by copying the files on the disk to the hard disk. Be sure to install the program correctly
by using the setup program.
Starting the host machine
Turn on power to the personal computer, and start Windows 95 or Windows NT.
Host machine: PC-9801 or PC-9821
IBM PC/AT compatible
CPU: Pentium
RAM: 32 Mbytes or more is recommended.
Starting the setup program
Select [Run] from the Start menu.
Enter the name of the drive for which [SETUP DISK] has been set and the file name SETUP .EXE in the [Open]
text box in the [Run] dialog box.
Example When Disk 1 inserted in drive B
After entering the drive name and file name, click the

CHAPTER 3 STARTING AND STOPPING

TM
(100 MHz or higher is recommended.)
User's Manual U13502EJ2V0UM00
button.
27