Part Name and Function
The Built-In AIT and magazine have the following parts and functions.
Important
The part names, functions, and settings of the installed 5.25-in device and installed 3.5-in device
(drive only) are the same. (For clarity, we use the 5.25-in device in the explanations below.)
Front
7
Front (when the dust cover is open)
8
1
72 Built-in AIT
1
6
5
4
3
1 Dust cover
2
Protects the data cartridge slot
against dust. (→ P. 85)
2 Ventilation holes
(The drive does not have ventilation
holes.)
3 EJECT button
Press this button when opening the
dust cover to set an AIT data
cartridge, or when ejecting a data
cartridge. (→ P. 85)
4 STATUS LED
LED that shows the Built-In AIT
status. (→ P. 88)
5 TAPE LED
LED that shows the status of the AIT
data cartridge. (→ P. 88)
6 BUSY LED
LED that shows the data
communication status. (→ P. 88)
7 Brackets
8 Data cartridge slot
A slot in which the AIT cartridge is set
(→ P. 86)