Download Print this page
   

Advertisement

NEC
Handset Layout
Soft Touch Keys
The NEC handsets have menus that can be accessed by
pressing the buttons below the LCD screen. There are 4 soft
touch keys that change depending on the mode you are in.
Line Keys / DSS Keys
The top line is programmed as "Line Keys" they shows lines
4 & 5 are in use. The bottom line is programmed as Direct
Station Select (DSS) keys in this example Joel's extension is
busy.
Navigation / Scroll Keys
Used for:
Speed dials.
o
Inbound call register.
o
Outbound call register.
o
Volume control.
o
SV8100 Quick Guide
Making Outside Calls
Lift handset.
o
Dial 0.
o
Dial telephone number.
o
Put a call on Hold
Press the Hold key during a call.
o
Outside calls will flash on the Line key.
o
Press the flashing key to retrieve the held call.
o
Transferring a Call
Without DSS keys
Method 1. ( Blind transfer )
Press the Transfer Key during a call.
o
Dial the required extension number.
o
Hang up to send the call through.
o
Method 2 ( Announced transferred )
Press the Transfer Key during a call.
o
Dial the required extension number.
o
Wait for answer, announce the call.
o
Hang up to send the call through.
o
or select green flashing line if called party does not
o
want to take the call.
With DSS keys
Method 1 (Blind transfer)
Press the DSS key during a call.
o
Hang up to send the call through.
o
Method 2 (Announced transferred)
Press the DSS key during a call.
o
Wait for answer, announce the call.
o
Hang up to send the call through.
o
or select green flashing line if called party does not
o
want to take the call.
www.phonehelp.com.au

Advertisement

   Summary of Contents for NEC SV8100

  • Page 1

    Press the Transfer Key during a call. Soft Touch Keys Dial the required extension number. The NEC handsets have menus that can be accessed by Hang up to send the call through. pressing the buttons below the LCD screen. There are 4 soft Method 2 ( Announced transferred ) touch keys that change depending on the mode you are in.

  • Page 2: All Calls

    Call Pick Up Cancel MSG Wait To answer another handset that is ringing. Lift handset. Dial * #. Conference If the green light appears on the top lamp, cancel by: lift handset. How to make a conference call (more than one call): dial 773.

  • Page 3: Accessing Your Messages

    Voice Mail Accessing your messages Set personal Voicemail Greeting When a message is waiting the red light will flash on the top Dial *8 from your handset. right side of the handset. Press the soft touch key VMsg to access the messages. Press the soft touch key Greet.

  • Page 4

    Change Time Press Speaker 728 hh mm Speaker Change Station Name Press Speaker Dial 700 Enter extension number Press Hold Enter name ( refer to table bellow ) Hold Program Speed Dials Press Speaker Dial 753 xxx (where XXX is a 3 digit speed dial location 001~ 899) Dial Number Press Hold Enter name ( refer to table bellow )

Comments to this Manuals

Symbols: 0
Latest comments: