INTRODUCTION
PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
5.4.16 Consideration on integrated bodies
This type of vehicles can be used to install different types of bodies, which, con-
nected to the vehicle cab, form a single unit. This includes motor caravans, ambu-
lances, partially integrated vans, etc.
Fig. 5-148 SPBGC54_031 Sample of a vehicle with integrated body
With an integrated body, a non-positive connection between the cab and the body
is required along the entire perimeter of the cab, i.e., in both B-pillars and the roof
beam.
Fig. 5-149 SPBGC54_014 Cab perimeter
V1.0, February 2015
MAINTENANCE AND DAMAGE PREVENTION
POWER TAKE-OFF
Body Builder Manual Part II, Specific Book LCV
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
197