Fuse Protection - Hyundai Body Builder 2015 Manual

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
The following recommendations should be considered:
-
-
-
-
-
7.3.5
All connections of the additional electricity consumers to the basic vehicle must be
protected by fuses in order to prevent the permissible peak loads accepted by the
different equipment from being reached. The same fuse must not be used for dif-
ferent connections.
All lines of connection points provided by HMC are protected by fuses; if new lines
are made, these must be protected in the same way.
For more information about fuses
V1.0, February 2015
POWER TAKE-OFF
The earth connections should not be modified.
Negative conductors connected to the earth point should be as short as possi-
ble.
Earth bolts which are connected to the vehicle's safety equipment must not be
used for equipment belonging to the body.
The maximum number of terminals allowed to be connected to the same earth
point is 4.
The torque of the earth bolts and nuts, which are M6, is max. 10+3 Nm.

Fuse protection

NOTICE
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
see chapter 7.2.3 "Fuse features".
WORK ON BASIC VEHICLE
APPENDIX
233