Hyundai Body Builder 2015 Manual page 245

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
1
2
3
4
1.
2.
3.
4.
Table 1-178 SPBTC75_002 Adjustment of headlamp low beam (based on 10 m screen)
V1.0, February 2015
POWER TAKE-OFF
ADJUSTMENT OF HEADLAMP LOW BEAM (BASED ON 10 m SCREEN)
Ground
Cut-off line
Horizontal line of head lamp bulb centre
W1 (low beam)
Turn the low beam on without driver aboard.
The cut-off line should be projected in the cut-off line shown
in the picture.
When aiming the low beam, vertical aiming should be adjusted after
adjusting the horizontal aiming.
If head light leveling device is equipped, adjust the head light levelling
device switch with 0 positions.
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
5 100 mm
6 Car axis
7 Vertical line of right head lamp bulb centre
8 Vertical line of left head lamp bulb centre
DESCRIPTION
WORK ON BASIC VEHICLE
APPENDIX
245