Hyundai Body Builder 2015 Manual page 52

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
After all weld work:
- Remove drilling chips.
- Deburr sharp edges.
- Preserve cavities with wax preservative.
HMC offers a few recommendations on resistance spot welding, one of the most
common welding procedures.
Resistance Spot Welding is a welding process in which work pieces are welded to-
gether by holding them together under pressure and apply localised heat generated
by a high electric current flowing through the contact area of the weld.
F Electrode Force
E Electrode
W Weld
Fig. 4-37 LCV_SPBGC41_002
52
MAINTENANCE AND DAMAGE PREVENTION
POWER TAKE-OFF
T Welding tong
A AC power supply
P Pieces to weld
Body Builder Manual Part II, Specific Book LCV
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
V1.0, February 2015