Hyundai Body Builder 2015 Manual page 83

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
The installation of different suspension systems on each side of one and the same
axle is not allowed.
The transformation of mechanical suspension intoa pneumatic suspension is an im-
portant point, because it could affect the vehicle's active safety. For example, it
could impair the performance of the airbag system. HMC should therefore be con-
tactd, to ensure that the change is properly managed.
The new suspension must meet all legal requirements and adapt to the specified
standards for homologation of each country. The minimum permissible height
should be observed.
V1.0, February 2015
POWER TAKE-OFF
NOTICE
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
83