Hyundai Body Builder 2015 Manual page 244

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
It should consider also the following references:
A: Screen
H1: Height between the headlamp (low beam) bulb centre and ground.
H2: Height between the headlamp (high beam) the high beam bulb centre and ground.
H3: Height between the fog light bulb centre and ground.
W1: Distance between the two headlamp (low beam) bulb centres.
W2: Distance between the two headlamp (high beam) high beam bulb centres.
W3: Distance between the two fog light bulb centres.
Vehicle condition
Projection w/o driver 960.5 (37.8)
type
w driver
MFR w/o driver
type
w driver
Table 1-177 SPBTC75_001 headlamp and fog light aiming points
244
POWER TAKE-OFF
HEADLAMP AND FRONT FOG LIGHT AIMING POINTS
DESCRIPTION
Headlamp - mm (inch)
H1 H2
942 (37)
960.5 (37.8) 942 (37)
948 (37.3) 944 (37.2)
948 (37.3) 944 (37.2)
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
W1 W2
1,488 (58.6) 1,274 (50.2)
1,488 (58.6) 1,274 (50.2)
1,540 (60.2) 1,280 (50.4)
1,540 (60.2)
WORK ON BASIC VEHICLE
APPENDIX
Fog light - mm (inch)
H3 W3
456.5 (18) 1,480 (58.3)
456.5 (18) 1,480 (58.3)
456.5 (18) 1,480 (58.3)
456.5 (18) 1,480 (58.3)
V1.0, February 2015