Hyundai Body Builder 2015 Manual page 38

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
Do not exceed the maximum weight distribution on the axles or the position of the
centre of gravity allowed, as this avoids the need for the reconfiguration or deac-
tivation of the VDC system. HMC recommends the maximum values for the rear
overhang, and these must be adhered to. The rear overhang (U) and the wheelbase
(WB) are directly related.
WHEELBASE
3,435 mm
3,670 mm
4,330 mm
Table 1-29 SPBTC23_009 Recommended maximum values for the rear overhang
Fig. 2-30 Wheelbase (WB) and rear overhang (U)
38
MAINTENANCE AND DAMAGE PREVENTION
POWER TAKE-OFF
OVERHANG LENGTH (U)
1,735 mm
1,875 mm
2,215 mm
Body Builder Manual Part II, Specific Book LCV
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
V1.0, February 2015