Hyundai Body Builder 2015 Manual page 105

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
Fig. 4-74
-
-
-
Fig. 4-75
-
-
V1.0, February 2015
POWER TAKE-OFF
LCV_SPBGC48_001 Laying and securing of hydraulic pipes
The hydraulic pipes must not be joined to other pipes belonging to different
systems, such as the electric or hydraulic systems.
The hydraulic pipes should be kept away from heat sources such as the exhaust
system, engine, etc.
If the brake pipes must pass through the chassis frame elements or through the
bodyshell, precautions should be taken to avoid damage. The use of a coupling
passing or rubber protection is recommended.
LCV_SPBGC48_002 Rubber protective
Friction with other parts of the vehicle must be avoided. The pipes are be cov-
ered with protectors in areas where this is necessary.
The pipes must be laid free of tension and without bends.
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
105