Hyundai Body Builder 2015 Manual page 25

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
The maximum length of the vehicle will be limited by:
-
-
-
Once the body has been installed, the final vehicle shall comply with the dimen-
sion and visibility values established by law.
According to this, the Body Builder has the final responsibility for ensuring that
the vehicle meets the necessary requirements, either for the system installed in-
factory or for those which have been installed after.
V1.0, February 2015
POWER TAKE-OFF
The distribution of axle weights.
See chapter 2.3.3 "Weight distribution".
Maximum values of the wheelbase.
See chapter 2.3.5 "Wheelbase".
Maximum values of the overhang.
See chapter 2.3.6 "Vehicle overhang".
NOTICE
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
25