Scope Of This Manual - Hyundai Body Builder 2015 Manual

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS MAINTENANCE AND DAMAGE PREVENTION WORK ON BASIC VEHICLE
MOUNTING AND CONSTRUCTION POWER TAKE-OFF ELECTRIC AND ELECTRONIC SYSTEMS APPENDIX
1.1

Scope of this manual

The purpose of this manual is to provide the Body Builders with technical informa-
tion and indications necessary for proper assembly between the superstructure and
the various chassis from Hyundai Motor Company (subsequently referred as HMC).
This manual has been specifically created for Light Commercial Vehicles (LCV).
It also refers to different binding regulations, recommendations for maintenance
and conservation as well as for the prevention of damage during construction work.
All this is in order to ensure the safety and good service of the vehicle and its com-
ponents after any modifications and alterations have been made.
This manual is specifically targeted for professionals, assuming they have the basic
knowledge needed to understand and manage this manual. Likewise, HMC recom-
mends having the construction work carried out by qualified personnel, in order to
avoid potential hazards or accidents and get the best result in the realisation of the
projects undertaken.
As for possible data discrepancies in this manual or between different versions of
additional manuals to it, the last upgrade always applies.
If any error or mistake is found, or you have any questions about the installation of
bodies on the HMC chassis, please contact with HMC freely.
See General Book, chapter 2.4 "Contact possibilities".
Detailed information in this book can be altered without notice beforehand accord-
ing to engineering revision. In this case the additional information should be revised.
HMC is continually striving to improve the technology for making the perfect vehi-
cle. HMC hopes that this book will help you and appreciates the habitual use of their
vehicles.
8 Body Builder Manual Part II, Specific Book LCV V1.0, February 2015