Hyundai Body Builder 2015 Manual page 113

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
-
Increasing the length of the tubes and adding joints can cause or increase the
noise level in the exhaust pipe. The installer is responsible for checking if there is
an increase in the noise level and, if there is, for solving the problem.
Specific regulations of each country on air purification systems and vehicle pollu-
tion must be complied with.
When carrying out modification work on the exhaust system, the use of compo-
nents supplied or approved by HMC is recommended
V1.0, February 2015
POWER TAKE-OFF
Once the work has been carried out, it will be necessary to measure the engine
back pressure in the exhaust system, to ensure that it is within the approved
limits.
CAUTION
ENVIRONMENT
NOTICE
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
113