Hyundai Body Builder 2015 Manual page 156

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
The number and the detailed position of the consoles for each vehicle model can
be found in the technical drawings.
HMC considers a maximum manufacturing tolerance on the chassis frame width of
(+6/-3 mm). When mounting prefabricated subframes on the chassis, it is important
to consider these values, in order to ensure that they are fixed properly.
Regardless of the type of console that is used, two fixing screws are always used.
Fig. 5-111 SPBGC53_002/SPBGC53_003 Mounting brackets and attachment consoles on the chassis frame
In this manual, HMC offers a number of ways of attaching the consoles to the sub-
frame, depending on the situation:
Fig. 5-112 SPBGC53_010 Different attachment methods of the subframe
156
POWER TAKE-OFF
NOTICE
See LCV Body Builder Manual Part lll - Drawings LCV
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
V1.0, February 2015