Steering System Modifications; Axle And Wheel Modifications - Hyundai Body Builder 2015 Manual

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
4.13
Any modification of the steering system of the
vehicle is strictly forbidden.
Modifications to the steering system could cause it to malfunction. This could lead
to loss of control of the vehicle, and accidents.
If changes are made to the steering system, the vehicle may lose the approval
certificate.
The important connections of the steering system should not be changed. If these
connections must be released, once the work is completed, they should be
restored to the original position and with the same torque.
Generally, no changes to the wheel alignment values are permitted. However, in
some cases, for instance if a considerable increment of the unladen weight of the
vehicle occurs as a result of the installation of the body or other equipment, it may
be suitable to calibrate the wheel alignment values, in order to adapt the vehicle in
the best way possible to its new operating conditions. Otherwise it could cause ex-
cessive wear on rims and suspension, besides shortening the life of the tyres.
To make changes in the values of wheel alignment, permission must be obtained
from HMC.
4.14
Axles
The modification of the undercarriage and axles is forbidden.
The addition of extra axles on the vehicle is not permitted.
The modification ofcontrol units, sensors, line routing for VDC and ABS is not per-
mitted.
V1.0, February 2015
POWER TAKE-OFF

Steering system modifications

WARNING
CAUTION
NOTICE
NOTICE

Axle and wheel modifications

Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
139