Hyundai Body Builder 2015 Manual page 210

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
PTOs supplied from factory dependent on the clutch - main features
The values of the maximum torques of PTO provided by HMC, in Nm, are based on
uniform loads (without vibrations) in which no single axial forces. The maximum in-
itial torques must never exceed twice the value indicated in the specifications of the
PTO connected to the gearbox.
Permissible torque
Rotation direction
Mounting position
Table 1-156 LCV_SPBTC62_002 Main features PTO dependent of the clutch
An excessive torque should not be supplied continuously, as this could cause dam-
age to the gearbox.
210
POWER TAKE-OFF
MAIN FEATURES OF PTO DEPENDENT ON THE CLUTCH
20 kgf (196 Nm)
1500 rpm
clockwise
T/M rh side
CAUTION
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
Features
PTO ratio
Operation system
TM model name
WORK ON BASIC VEHICLE
APPENDIX
0.697
vacuum
T045S6
(HYUNDAI DYMOS)
V1.0, February 2015