Table of Contents
Advertisement
INTRODUCTION
PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
4.12.9 Interior installations for load fixations
During the transport of goods is important to use good load restraint systems, which
are accessible and easy to use. This it will protect both the load and the vehicle.
The shelves, rails or other elements should be anchored to the strong points of the
structure of the vehicle; either laterals walls and ceiling or floor. Otherwise, damage
could occur to the body shell of the vehicle.
Fig. 4-97
Use only approved products to ensure quality and safety inside vehicle. They must
possess adequate strength, and be secured by suitable means. They should try to
distribute the load in the best way possible.
4.12.10 Retarder
As HMC is developing the retarder option at the moment, no information on this top
ic has yet been disclosed. As soon as the information is available, this chapter will
be updated.
V1.0, February 2015
POWER TAKE-OFF
LCV_SPBGC412_003
???
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
-
137
Advertisement
Table of Contents
