Study Of Different Types Of Bodies; General Considerations - Hyundai Body Builder 2015 Manual

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
5.4
5.4.1
HMC provides a wide range of basic vehicles with different features to suit the dif-
ferent variants of bodies that are most common in the market. So, HMC tries to
achieve the best assembly between body and chassis, with optimum strength, com-
fort, manoeuverability and cargo handling characteristics.
In this type of construction, attention should be paid to the minimum rear wheel
arches and the areas which should be free above the chassis frame.
When planning the assembly between chassis and body the following points should
be considered:
-
-
-
162
POWER TAKE-OFF

Study of different types of bodies

General considerations

NOTICE
See chapter 2.2 "Range of vehicles supplied by HYUNDAI".
Choose a chassis frame that harmonises as well as possible with the planned
body.
Check the correct distribution of masses and loads to ensure stability during
vehicle operation.
Choose the right frame size for the chassis and subframe to withstand the
stresses to which the vehicle will be subjected in conditions such as loading and
unloading, driving on rough roads, etc.
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
V1.0, February 2015