Structure - Hyundai Body Builder 2015 Manual

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
4.3.8
The bearing structure of the panel and passenger vans, i.e., the skeleton of the ve-
hicle, consists mainly in a number of roof beams and lateral pillars connected to the
chassis frame. They are properly distributed throughout the vehicle to optimise its
performance. It is important to prevent modification of these elements, as this could
lead to a loss of stiffness and strength in the vehicle structure.
Table 1-54 LCV_SPBGC43_003 Body structure Panel Van high roof
V1.0, February 2015
POWER TAKE-OFF

Structure

Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
79