Hyundai Body Builder 2015 Manual page 142

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
If necessary, and depending on the complexity of the electrical system installed on
the vehicle, the Body Builder should make additional wiring diagrams; these must be
added to the rest of the vehicle documents. This makes it possible to work more
efficiently if carrying out modifications or repairs. If modifications or new installa-
tions affect HMC's electrical system, HMC should be contacted, to obtain confirma-
tion of the work to be performed.
To obtain more detailed information about authorisations.
tures"
The connection of additional consumers by splicing to the electrical circuit is not al-
lowed. The connections can only be effected on the points authorised for this pur-
pose.
For more information about the possible connections for additional electrical con-
sumers:
No intervention in the vehicle CAN bus or in the systems connected to it is allowed.
For information about the electronic system of the vehicle:
The maximum transmit power of the communication antennas allowed in each coun-
try must be taken into account. These values must not be exceeded.
For information about the electronic system of the vehicle:
142
POWER TAKE-OFF
NOTICE
See General Book, chapter 2.6 "Verification and certification of superstruc-
NOTICE
See chapter 7.3 "Additional electricity consumers".
NOTICE
See chapter 7.7 "Electronic system".
NOTICE
See chapter 7.6 "Communication Systems".
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
V1.0, February 2015