Hyundai Body Builder 2015 Manual page 271

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
Knowing the value of elevation of the axle S, the value of the elevation angle α can
easily be obtained, as the wheelbase WB is also known:
Subsequently, using the equations of static equilibrium:
It is also known that:
It is necessary to verify that the data obtained by calculation is within the limits
allowed by the standard as well as within the values supplied by this manual.
V1.0, February 2015
POWER TAKE-OFF
5)
See chapter A.2.1 "General concepts and formulas"
Σ MO = 0; L
6)
h =
7)
NOTICE
See chapter 2.3.4 "Centre of Gravity (CoG)".
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
α = arcsine (S/WB
Σ MO = 0; L * c = T
F W
* (a+b) = T * (b
F W
T b - L (a+b)
W * F
T tan α
W *
H = h + r
WORK ON BASIC VEHICLE
2)
* d
- h )
cos α sen α
APPENDIX
271