Table of Contents
Advertisement
INTRODUCTION
PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
A minimum clearance between the wheel and mud guard must be respected:
Permissable gross
Table 1-88 TABLE LCV_SPBTC23_008 Minimum distances of the wheel well for chassis
The type and position of mudguards depend on the vehicle model and the size of
wheel that is mounted.
The space needed to mount snow chains must be taken into account, even if the
suspension elements are compressed to the maximum.
Mud flaps
The rear mud flap is a flexible component mounted vertically at the bottom of the
chassis frame, the body or the mud guards. The mud flaps also serve to reduce the
risk of the tyres throwing small objects, especially gravel, towards other road users.
If mud flaps are fitted, they must comply with the standard.
Fig. 4-89
V1.0, February 2015
POWER TAKE-OFF
MINIMUM DISTANCES OF THE WHEEL WELL FOR CHASSIS
vehicle weight
3.5 t
235/65R16
5.0 t
2 x 195/75R16
NOTICE
LCV_SPBGC412_004 Mud flap
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
Tires
X1
410
405
WORK ON BASIC VEHICLE
Dimensions (mm)
X2
Y1
Y2
410
152
499
405
100
614
APPENDIX
A
247
238
129
Advertisement
Table of Contents
