Hyundai Body Builder 2015 Manual page 109

INTRODUCTION PRELIMINAR STUDIES AND CONSIDERATIONS
MOUNTING AND CONSTRUCTION
In the case of excessive, unfavorable climatic zones, some changes can be made
after a proper study of the new installation, always in conformity with HMC.
Additional cooling devices should be provided for when the vehicle is stationary,
and constant high cooling capacity is required.
More information about HMC conformities in:
tures".
Soundproofing:
The insulating elements for engine noise must not be changed. If some modification
of the relevant parts is necessary from the point of view of the generation of noise
in the engine, or in association with this element, noise tests must be performed, in
order to ensure that the levels are within the permissible values.
Standard parts for soundproofing mounted in the basic vehicle should not be
removed or modified.
The changes must not compromise the soundproofing of the cab.
Directive 70/157/EEC and the regulations of the each country must be consid-
ered.
To obtain more information about noise insulation:
V1.0, February 2015
POWER TAKE-OFF
NOTICE
NOTICE
NOTICE
See General Book, chapter 2.6 "Verification and certification of superstruc-
CAUTION
NOTICE
NOTICE
See chapter 4.5.2 "Noise insulation".
See chapter 2.3.9 "Noise insulation".
Body Builder Manual Part II, Specific Book LCV
MAINTENANCE AND DAMAGE PREVENTION
ELECTRIC AND ELECTRONIC SYSTEMS
WORK ON BASIC VEHICLE
APPENDIX
109