Creating A Host Pool - Brocade Communications Systems RFS4000 Cli Reference Manual

Creating a Host Pool

To create a host pool:
1. Create a DHCP server host address pool.
2. Assign the client name of the host for which static allocation is required.
3. Assign an IP address for the host.
4. Configure the hardware address of the host.
5. Exit from the DHCP instance upon creation of the network pool.
6. Start the DHCP Server to instantiate the network pool.
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
RFController(config)#ip dhcp pool hostpool
RFController(config-dhcp)#client-name linuxbox
RFController(config-dhcp)#host 192.168.0.50
RFController(config-dhcp)#hardware 00:a0:f8:6f:6b:88
RFController(config-dhcp)#exit
RFController(config)#service dhcp
Configuring the DHCP server using controller CLI
17
539