Brocade Communications Systems RFS4000 Cli Reference Manual page 176

4
Priv Exec command
cd
Priv Exec command
Changes the current directory
Supported in the following platforms:
•
•
•
Syntax
Parameters
<DIR>
Example
174
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
cd {<DIR>}
Changes current directory to DIR. This parameter is optional.
When this parameter is not provided, the current directory name
is displayed.
RFController#cd
nvram:/ system:/ flash:/
RFController#cd flash:/?
DIR Change current directory to DIR
RFController#cd flash:/
flash:/backup/ flash:/crashinfo/
flash:/out/
RFController#cd flash:/log/?
DIR Change current directory to DIR
RFController#cd flash:/log/
RFController#pwd
flash:/log/
RFController#
flash:/hotspot/
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
flash:/log/
53-1001931-01