Static-Channel-Group - Brocade Communications Systems RFS4000 Cli Reference Manual

2
show

static-channel-group

Common to all modes
Displays the members of the static channel groups
Supported in the following platforms:
•
•
NOTE
This command is not supported on the Mobility RFS6000 Controller
Syntax
Parameters
None
Example
104
Mobility RFS7000 Controller
Mobility RFS4000 Controller
show static-channel-group
RFController(config)#show static-channel-group
RFController(config)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01