no
ESPI config commands
Defines the name of the adapter or disables the adapter(s)
Supported in the following platforms:
•
•
•
Syntax
Parameters
adapter ale-tcp [enable|port
<3000-3100>]
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no adapter ale-tcp [enable|port <3000-3100>]
Negates ESPI adapter configurations.
•
RFController(config-rtls-espi)#no adapter ale-tcp enable
RFController(config-rtls-espi)#
adapter – Application side Protocol implemented by adapter.
•
ale-tcp – ALE over TCP Adapter
•
enable – Deactivates/disables ESPI adapter
•
port <3000-3100>– Configure ESPI adapter
listening port
ESPI config commands
22
735