boot
Global Configuration commands
Reboots the controller with an image in the mentioned partition (either the primary or secondary
partition)
Supported in the following platforms:
•
•
•
Syntax
Parameters
system [primary|secondary]
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
boot system [primary|secondary]
Specifies the boot image used after reboot
•
•
RFController(config)#boot system primary
Wireless controller will be rebooted, do you want to continue? (y/n):y
Do you want to save the configuration? (y/n):y
The system is going down NOW !!
% Connection is closed by administrator!
Please stand by while rebooting the system.
Global Configuration commands
primary – Specifies the primary image
secondary – Specifies the secondary image
5
229