whitelist
Global Configuration commands
White list is a list of host names and IP addresses that are permitted access by default.
Supported in the following platforms:
•
•
•
NOTE
whitelist command instantiates (config-whitelist) instance. The prompt changes from
(config)#
Syntax
Parameters
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
to
RFController (config-whitelist)
whitelist [clrscr|end|exit|help|no|permit|show|service]
whitelist no permit
whitelist permit [<A.B.C.D>|<Hostname>]
clrscr
end
exit
help
no
[<A.B.C.D>|Hostname
<suffix>]
RFController(config-whitelist)#permit 172.16.10.3
RFController(config-whitelist)#permit brocade suffix
RFController(config-whitelist)#
Global Configuration commands
Clears the display screen.
Ends the current mode and changes to EXEC mode.
Ends the current mode and changes to previous mode.
Displays the interactive help system.
Negates a command or sets its defaults.
Permits list of hostnames and IP addresses.
<A.B.C.D> – Displays IP address
<Hostname> suffix – Displays hostname
suffix – Matches any hostname including this one as suffix
5
RFController
325