qos-mapping
Wireless configuration commands
Configures QoS mappings between the wired and wireless domains
Supported in the following platforms:
•
•
•
Syntax
Parameters
wired-to-wireless [dot1p
<0-7>|dscp <0-63>]
[<0-7>|tid0|tid1|tid2|tid3
|
tid4|tid5|tid6|tid7]
wireless-to-wired
[tid0|tid1|tid2|tid3|
tid4|tid5|tid6|tid7]
dot1p <0-7>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
qos-mapping [wired-to-wireless|wireless-to-wired]
qos-mapping wired-to-wireless [dot1p <0-7>|dscp <0-63>]
[<0-7>|tid0|tid1|tid2|tid3|tid4|tid5|tid6|tid7]
qos-mapping wireless-to-wired [tid0|tid1|tid2|tid3|tid4|tid5|tid6|tid7] dot1p
<0-7>
Mappings used while controlling wired traffic over the air .
•
•
•
•
•
•
Mappings used while controlling wireless traffic to the wired side.
•
•
•
•
•
RFController(config-wireless)#qos-mapping wireless-to-wired background dot1p 5
RFController(config-wireless)#
Wireless configuration commands
dot1p <0-7> – Configures the mapping of 802.1p tags to
access categories. You can specify more than one 802.1p
tags with in the range 0 and 7.
dscp <0-63> – Configures the mapping of DSCP values to
access categories. You can specify more than one DSCP
values in the range 0-63.
tid0, tid3– best effort category traffic
tid1, tid2 – background category traffic
tid4, tid5 – video traffic category traffic
tid6, tid7 – voice traffic category traffic
tid0, tid3– best effort category traffic
tid1, tid2 – background category traffic
tid4, tid5 – video traffic category traffic
tid6, tid7 – voice traffic category traffic
dot1p <0-7> – Configures the mapping of 802.1p tags to
access categories. You can specify more than one 802.1p
tags with in the range 0 and 7.
20
643