Ekahau - Brocade Communications Systems RFS4000 Cli Reference Manual

ekahau

RTLS config commands
Enables and configures the external ekahau location engine
Supported in the following platforms:
•
•
•
Syntax
Parameters
enable
engine ip<IP> port <Port>
multicast-listen-addr <MAC> Configures multicast MAC address to which ekahau tags packets
Use
and disable it.
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ekahau [enable|engine ip<IP> port<Port>|multicast-listen-addr<MAC>]
Enables and configures external ekahau RTLS engine
Configures the IP address and port number of the external ekahau
RTLS engine
•
•
are destined
•
and
[no] enable [no] engine <ip><port>
RFController(config-rtls)#ekahau enable
RFController(config-rtls)#
RFController(config-rtls)#ekahau engine ip 10.1.1.1 port 1001
RFController(config-rtls)#
RFController(config-rtls)#ekahau multicast-listen-addr 01-18-8E-00-00-00
RFController(config-rtls)#
ip – Configures external location engine IP address
port <1000-9000> – Configure external location engine port
<MAC> – Multicast MAC address
to undo theekahau RTLS engine configuration
RTLS config commands
21
713