Virtual-Ip - Brocade Communications Systems RFS4000 Cli Reference Manual

5
Global Configuration commands

virtual-ip

Global Configuration commands
Displays virtual-ip configuration of the controller
Supported in the following platforms:
•
•
•
Syntax
Parameters
Example
318
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
virtual-ip [<A.B.C.D/M>|advt-timeout <1-5>|enable|
garp-timeout <30-600>|learning-timeout <2-5>|priority|vmac]
virtual-ip <A.B.C.D/M> vlan <1-4096>
virual-ip priority [<1-256>|auto]
virual-ip vmac <AA-BB-CC-DD-EE-FF>
<A.B.C.D/M> vlan <1-4096> Displays virtual-ip configuration details of the controller
advt-timeout <1-5>
enable
garp-timeout <30-600>
learning-timeout <2-5>
priority [<1-256>|auto]
vmac
<AA-BB-CC-DD-EE-FF>
RFController(config)#virtual-ip 192.168.11.10/24 vlan 11
RFController(config)#
RFController(config)#show virtual-ip config
VIP Status
Cluster Redundancy Status
Priority Selection Mode
VMAC Selection Mode
Learning Timeout(sec)
Advertisement Timeout(sec)
External VLAN
External Gateway
Virtual-IP Server Port
•
<A.B.C.D/M> – Displays ip address of the controller
•
vlan <1-4096> – Displays vlan of the vip
•
<1-4096> – Displays the vlan range value of the
vip
Displays advertisement timeout in seconds
•
<1-5> – Displays the value in seconds
Enables IP Redundancy protocol
Displays Gratituous ARP timeout in seconds . The default time is
180 seconds
•
<30-600> – Displays value in seconds
Displays learning timeout in seconds
•
<2-5> – Displays learning timeout value in seconds
Displays priority of the controller
•
<1-256> – Displays manual priority range
•
auto – Displays automatic priority selection
Virtual MAC to be used by the master
•
<AA-BB-CC-DD-EE-FF> – Allowed VMACs: from
00:15:70:88:8a:90 to 00:15:70:88:8b:8f
: Disabled
: Enabled
: Automatic
: Automatic
: 2
: 1
: 0
: 0.0.0.0
: 51525
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01