Sensor - Brocade Communications Systems RFS4000 Cli Reference Manual

sensor

Wireless configuration commands
Configures Wireless Intrusion Protection System (WIPS) parameters
Supported in the following platforms:
•
•
•
Syntax
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
sensor [<1-48>|default-config|ping-interval|vlan]
sensor <1-48> [default-config|request-config|revert-to-ap]
sensor default-config [gateway-ip|ip-mode|wips-server-ip]
sensor default-config gateway-ip <IP>
sensor default-config ip-mode [dhcp|static <IP/Mask>]
sensor default-config wips-server-ip [primary|secondary]
<IP>
sensor ping-interval <2-60>
sensor vlan <1-4094> {<1-4094>}
Wireless configuration commands
20
659