Brocade Communications Systems RFS4000 Cli Reference Manual page 560

19
Radius configuration commands
ca
Radius configuration commands
Configures CA (Certificate Authority) parameters
Supported in the following platforms:
•
•
•
Syntax
Parameters
trust-point
<trustpoint-name>
Usage Guidelines
Configures the trustpoint used by the local RADIUS server. Create the
used by the
The default trust point in use is –
Example
558
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ca trust-point <trustpoint-name>
Defines the trustpoint configuration
•
crypto pki trustpoint
RFController(config)#radius-server local
RFController(config-radsrv)#ca trust-point tp1
RFController(config-radsrv)#
<trustpoint-name> – Displays the existing trustpoint name
command.
default-trustpoint
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
trustpoint
.
before it can be
53-1001931-01