client-identifier
DHCP Config commands
Assigns a name to the client-identifier
A client identifier is used to reserve an IP address for a DHCP client.
Supported in the following platforms:
•
•
•
Syntax
Parameters
client-identifier
<identifier>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
client-identifier <identifier>
RFController(config-dhcp)#client-identifier testid
RFController(config-dhcp)#
Prepends a null character. Use
single
in the input is ignored)
\
DHCP Config commands
at the beginning (a
\\0
17
513