Brocade Communications Systems RFS4000 Cli Reference Manual page 468

14
Extended ACL config commands
Permitting Telnet based traffic
The example below permits Telnet traffic from the source subnet and the destination subnet and
denies all other traffic over an interface:
Permitting ICMP based traffic
The example below permits ICMP traffic and denies all other traffic over an interface:
466
RFController(config-ext-nacl)#permit ip 192.168.1.10/24 192.168.2.0/24
rule-precedence 40
RFController(config-ext-nacl)#
RFController(config-ext-nacl)#permit tcp 192.168.4.0/24 192.168.5.0/24 eq 23
rule-precedence 10
RFController(config-ext-nacl)#
RFController(config-ext-nacl)#permit icmp any any rule-precedence 30
RFController(config-ext-nacl)#)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01