Brocade Communications Systems RFS4000 Cli Reference Manual page 623

Parameters
access-point
all
alt
ap-containment
ap-detect
capwap
cluster
config
dot11
eap
ids
kerberos
l3-mob
loc-ap
loc-client
media
wireless-client
radio
radius
self-heal
smart
snmp
system
wips
wisp
wlan
For all the above parameters, the following optional values are set:
debug
err
info
warn
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Sets the parameters for the access-point logs
Sets the parameters for all the modules
Sets the parameters for the address lookup logs
Sets the parameters for the ap-containment logs
Sets the parameters for the Rogue AP detection logs
Sets the parameters for the CAPWAP logs
Sets the parameters for the cluster related logs
Sets the parameters for the configuration change logs
Sets the parameters for the datapath logs
Sets the parameters for the 802.11x eap logs
Sets the parameters for the intrusion detection logs
Sets the parameters for the kerberos logs
Sets the parameters for the Layer-3 mobility logs
Sets the parameters for the AP locationing logs
Sets the parameters for the Client locationing logs
Sets the parameters for the encapsulation media logs
Sets the parameters for the wireless-client logs
Sets the parameters for the radio logs
Sets the parameters for the radius client logs
Sets the parameters for the self healing logs
Sets the parameters for the smart-rf logs
Sets the parameters for the snmp logs
Sets the parameters for the system call logs
Sets the parameters for the WIPS sensor logs
Sets the parameters for the WISP logs
Sets the parameters for the WLan logs
all the messages are logged
only error and higher severity messages are logged
only information and higher severity messages are logged
only warning and higher severity messages are logged
RFController(config-wireless)#debug cc ?
access-point access-point logs
all all modules
alt address lookup logs
Wireless configuration commands
20
621