Rate-Limit - Brocade Communications Systems RFS4000 Cli Reference Manual

rate-limit

Wireless configuration commands
Sets the default rate limit per user in kbps, and applies to all enabled WLANs
Supported in the following platforms:
•
•
•
Syntax
Parameters
wired-to-wireless
<100-100000>
wireless-to-wired
<100-100000>
Usage Guidelines
Use
applied to the group
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
rate-limit [wired-to-wireless|wireless-to-wired] <0-100000>
Down link direction from network to wireless client
•
Up link direction from wireless client to network
•
{no} rate-limit [wired-to-wireless|wireless-to-wired] to
RFController(config-wireless)#rate-limit wired-to-wireless 1000
RFController(config-wireless)#
RFController(config-wireless)#rate-limit wireless-to-wired 20000
RFController(config-wireless)#
Wireless configuration commands
<100-100000> – rate in the range of <100-100000> kbps
<100-100000> – rate in the range of <100-100000> kbps
20
remove the rate limit
655