20
Wireless configuration commands
hotspot
Wireless configuration commands
Configures the WLAN hotspot configuration
This overrides or adds to the existing hotspot configuration on the WLAN.
Supported in the following platforms:
•
•
•
Syntax
Parameters
<query-index>
<WORD>
[
controller-ip||ssid
|mu-mac|mu-ip|
controller-name|
user-string]
Example
630
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
hotspot query <query-index> <WORD>
[ap-mac|mu-mac||ssid|mu-ip|controller-ip|controller-name|user-string]
The index of this query in the query list. Can be in the range of 1
and 10.
The name of the field in the URL whose value is substitute with
the parameters
•
•
•
•
•
•
•
RFController(config-wireless)# hotspot query 1 user-name user-string
RFController(config-wireless)# hotspot query 2 from client-ip
RFController(config-wireless)#
ap-mac – AP MAC address of the MU.
controller-ip – The controller's router ip-address for the
external hotspot server
mu-mac – MAC address of teh MU.
ssid – The WLAN's SSID
mu-ip – The MU's IP address
controller-name – The controller's name on the network
user-string – Specifies that the value of the query is a user
string.
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01