Client-Mac - Brocade Communications Systems RFS4000 Cli Reference Manual

client-mac

Role config commands
Configures the Client MAC addresses for role based firewall
Supported in the following platforms:
•
•
•
Syntax
Parameters
<MAC Address>
<MAC Address>/<Mask>
any
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
client-mac [<MAC Address>|<MAC Address>/<Mask>|any]
The address of the Client that is allowed. MAC address can be in
the format AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF or
AABB.CCDD.EEFF.
The address and mask combination for the Client to be allowed.
<MAC Address> and <Mask> should be in the format
AA:BB:CC:DD:EE:FF or AA-BB-CC-DD-EE-FF or AABB.CCDD.EEFF
Match with any MAC address.
RFController(config-role)#client-mac aa:bb:cc:dd:ee:ff
RFController(config-role)#
Role config commands
26
809