Tunneling - Brocade Communications Systems RFS4000 Cli Reference Manual

tunneling

Interface config commands
Sets protocol-over protocol tunneling.
Supported in the following platforms:
•
•
•
Syntax
Parameters
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
tunnel [destination <A.B.C.D>|source <A.B.C.D>|ttls <1-255>]
destination <A.B.C.D>
source <A.B.C.D>
ttl<1-255>
RFController(config-if)#tunnel destination 1.2.6.3
RFController(config-if)#
Interface config commands
Destination of the tunnel packet.
•
<A.B.C.D> – Specifies the IP address of the destination.
Source of tunnel packets.
•
<A.B.C.D> – Specifies the IP address of the source.
Sets time to live.
12
433