Power - Brocade Communications Systems RFS4000 Cli Reference Manual

2
show

power

Common to all modes
Displays the power configuration and status for the Mobility RFS6000 Controller controller
Supported in the following platforms:
•
•
NOTE
This command is not supported on the Mobility RFS7000 Controller.
Syntax
Parameters
Example
86
Mobility RFS4000 Controller
Mobility RFS6000 Controller
show power [configuration|status]
configuration
status
RFController(config)#show power configuration
Power usage trap at 80% of max power (148 of 185 Watts)
port Priority Power limit Enabled
ge1 high 29.7W
ge2 high 29.7W
ge3 high 29.7W
ge4 high 29.7W
ge5 high 29.7W
ge6 high 29.7W
ge7 high 29.7W
ge8 high 29.7W
POE firmware version 01f6 build 4
RFController(config)#
Displays configuration of power over ethernet
Displays status of power over ethernet
yes
yes
yes
yes
yes
yes
yes
yes
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01