Brocade Communications Systems RFS4000 Cli Reference Manual page 56

2
Common commands
54
•
num-client – The number of mobile devices
associated with this radio
•
power – The configured and current transmit
power of the radio
•
pref-id – The adoption preference id of the radio
•
radio-desc – The description of the radio
•
radio-id – The radio index in configuration
•
state – The current operational state of the radio
•
dot11i – modify dot11i service parameters
•
dump-core – Creates a core file of the ccsrvr process
•
enhanced-beacon-table [channel-set|enable|
erase-report|max-ap|scan-interval|scan-time]– Enhanced
beacon table for AP locationing.
•
channel-set [a|an|b|bg|bgn] <1-200> – Adds
channels to the different radio types. Channel types are
a, an, b, bg, bgn. The channel number must be in the
range 1 to 200.
•
enable – Enables the Enhance Beacon Table feature for
AP locationing
•
erase-report – Erases the reports for Enhanced Beacon
Table feature.
•
max-ap <0-512> – Sets the maximum number of APs to
be recorded in the Enhanced Beacon Table. Set a value
in the range 0 -512.
•
scan-interval <10-60>– The time duration between two
enhanced beacon table for AP locationing scans in
seconds.
•
scan-time <100-1000>– The time duration of an
Enhanced Beacon Table scan in millisecond.s
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01