Brocade Communications Systems RFS4000 Cli Reference Manual page 267

mac
Global Configuration commands
Configures MAC access lists (goes to the MAC ACL mode)
For more information on this mode, see
Supported in the following platforms:
•
•
•
Syntax
Parameters
access-list extended
<mac-acl-name>
Usage Guidelines
To delete Standard/Extended and MAC ACL, use
the Global Config mode.
Example
NOTE
When using the
MAC ACL. For more details see
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
mac access-list extended <mac-acl-name>
Defines the ACL configuration for the MAC address
•
RFController(config)#mac access-list extended Test1
RFController(config-ext-macl)#
ip access-list
Global Configuration commands
Chapter 16, Extended MAC ACL
extended <mac-acl-name>– MAC Extended ACL
•
<mac-acl-name> – Defines the name of the ACL
no access-list <access-list name>
parameter, enter the following contexts: ext-macl — extended
.Extended MAC ACL Instance on page 487
5
Instance.
under
265