Default-Router - Brocade Communications Systems RFS4000 Cli Reference Manual

default-router

DHCP Config commands
Configures the default router or gateway IP address for the network pool. To remove the default
router list, use the
Supported in the following platforms:
•
•
•
Syntax
Parameters
default-router
< IP>
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
no default-router
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
default-router <IP>
RFController(config-dhcp)#default-router 2.2.2.1
RFController(config-dhcp)#
command.
Specifies the default router IP address for the network
pool
•
< IP> – Sets the router's IP address
DHCP Config commands
17
517